0
About this product+
Fits Glock Models: G43, G43X, & G48.
Give your Glock G43, G43X, and G48 a custom look by dressing it up with this Titanium Nitride (TiN) coated kit from NDZ Performance. The pins are made from durable stainless steel to ensure reliabilty for the life of your firearm. The extended slide release in this kit is from Ghost and is designed for aggressive manipulations as well as positive slide releases and stopping even under the most adverse conditions. Finally the NDZ extended slide lock lever is longer than stock, but not long enough to hang up on holsters. All of these products are coated in matching Titanium Nitride (TiN) for a brilliant finish and life long durability. Upgrade the performance of your Glock with this high quality kit from NDZ Performance today!
This kit contains the following:
- Extended Slide Lock Lever
- Trigger Pin
- Trigger Housing Pin
- Ghost Extended Slide Release - ESR
Installation Instructions: Push down on the ESLL spring while inserting the ESLL on the right or left side of the frame.
Removal Instructions:
- Remove Slide.
- Push down on ESLL spring (the spring is locked into a notch at the bottom of the ESLL) while pushing the ESLL to the left or right for removal from the frame .
Note: The Groove at the top of the ESLL must face the rear of the frame for proper lockup on the hook on the barrel lug.
See our complete line of Glock Gen 43 Products here
See our complete line of Glock Gen 48 & 43X Products here
TiN coating is used in aerospace and military applications and to protect the sliding surfaces. Titanium Nitride (TiN) is a PVD coating with a wide range of applications due to the practical properties such as high hardness, good corrosion resistance, heat resistance and excellent wear resistance etc. TiN is a beautiful rich gold color that has a hard finish and is scratch and wear resistant. With the capabilities of being applied to just about any metal surface it is lubricious, corrosion and chemical resistant. It is a cost effective alternative to gold plating. No appreciable build-up to interfere with any firearm operation.
Note: NDZ always recommends any part be installed by a qualified and trained gunsmith. NDZ promotes the use of safety practices and gear when working on any firearm.
DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
