0
About this product+
Fits Glock Gen 4-5 Models: G19, G19X, G23, G32, G38, & G45.
Does Not Fit: Glock Gen 1-3 Models.
NDZ Reduced Power Recoil Spring Kits upgrade a range of Gen 4-5 models and provide a decisive advantage for Glock owners. Special features include a rigid stainless-steel body that improves lock up by completely removing "guide rod flex", as well as a hex screw removable tip that allows the user to choose various spring weights that will calibrate the ammunition to their firearm.
Included in this Kit:
- ( 1 ) - Black Anodized Steel Gen 4-5 Guide Rod Adapter.
- ( 1 ) - Stainless Steel Guide Rod with hardware.
- ( 1 ) - 3/32" Allen Wrench.
- ( 1 ) - 13lb ISMI Reduced Recoil Spring.
- ( 1 ) - 15lb ISMI Reduced Recoil Spring.
The NDZ Glock Generation 4-5 Adapter Ring installs under the retention end screw thereby making up the difference of space in the front of a gen 4-5 slide as well as retaining the spring accordingly.
We recommend the use of Blue Loctite on the hex screw threads when switching out springs. This will provide a firm hold and still allow easy removal when necessary.
Note: Please make sure you are using the correct loads for the springs or you will have cycling issues.
Glock Factory Recoil Spring Weights by Model:
- Models: G17, G20, G21, G22, G24, G31, G34, G35, G37, G40, G41 - Factory Stock Spring weight is 17lbs.
- Models: G19, G19X, G23, G32, G38 - Factory Stock Spring weight is 18lbs.
What Recoil Spring Weight do you Need?
- 11 - 13lbs Springs: Typically used for Competition Shooting, or when using a Recoil Compensator with Barrel. A lighter weight Recoil spring allows for a faster recoil time. This allows the shooter to stay on target longer and makes target re-acquisition, Faster and Easier.
- 16lbs Springs: For Reduced Power Ammunition Loads.
- 17 - 18lbs Springs: Factory Weight.
- 19 - 24lbs Springs: For Heavy Power Ammunition Loads +p or +p+.
See our complete line of Glock Gen 1-4 Products here
See our complete line of Glock Gen 5 Products here
NDZ Performance is a USA Manufacturer of High Quality Aftermarket Accessories. Proudly made right here in the USA to the Highest Quality Standards with a Lifetime Warranty against Manufactured Defects.
ISMI premium springs are manufactured exclusively with certified aerospace specification alloys; stainless or chrome silicon. Then the springs are heat treated, shot-peened and stress relieved after winding to enhance performance and durability.
Note: NDZ always recommends any part be installed by a qualified and trained gunsmith. NDZ promotes the use of safety practices and gear when working on any firearm.
DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
