Ghost 3.5 Ultimate Trigger Connector and Wolff Factory Standard Spring Kit

Product Code: GHO-ULT-TC-WGS-SK-FSTD

Manufacturer: Ghost

$23.99
Quantity in Stock

About this product+

We have paired these two great products together because without a doubt this Kit will give you one of the best Trigger pull combinations available today for any Glock !

GHOST, Inc ULTIMATE 3.5 Trigger Connector for Glock GEN 1-4 !!



The Ultimate in Drop-in 3.5 lb trigger connectors. The Ultimate incorporates the patent pending debris channels which removes debris From the trigger mechanism and reduces the friction of the trigger parts making the Ultimate smooth and self cleaning. Why is self cleaning so important ecause as you fire your pistol debris builds up on the trigger mechanism surfaces. This debris causes additional friction. This friction increases the weight of the trigger pull thus increasing the force applied to the connector. As the trigger pull weight increases the connector is pushed towards the rear of the trigger housing eventually far enough that the pistol will not fire! The channels also reduce the thickness of the connector body by 33%. This reduction increases reset speed and because these channels are located on the center line of the connector body they do not cause connector torsion. These features along with polishing gives you the Ultimate in light smooth 3.5 lb trigger pulls. - Ghost Inc.



Recommended: A gunsmith or armorer should install this connector.



MADE in USA

NEW ! Wolff Upgrade Factory Standard Trigger Spring Kit

The Wolff Drop in Spring Kit Replaces Weak or Broken Springs back to Factory Standard.

Included in the kit are 3 Drop in Springs

5.5 LB Factory Standard Power Striker Spring

Factory Standard Power Safety Block Plunger Spring

Factory Standard Power Trigger Spring

fast shipper, ships same or next business day

Accurately calibrated spring weights deliver consistent force through the entire compression and release cycle to give you a refined trigger pull without sacrificing the reliability of your pistol s Safe Action system.

NDZ Performance has teamed up with W.C. Wolff Gun Springs to bring you some of the finest Aftermarket Gun Springs available today. Wolf has been making Gun springs for over 60 years. These springs are awesome you will not be disappointed in their performance. We have several springs kits and individual springs to meet all your needs.

This Kit will work on ALL Gen 1-3 Glock Models: 17 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 29 / 30 / 31 / 32 / 33 / 34 / 36 / 37 / 38 / 39

Warning: This is a stock replacement kit.

Please note this will not work in Generation 4 Glocks

Warning: This kit is for competition use only - not for duty use.

W. C. WOLFF COMPANY GUARANTEES THAT ITS PRODUCTS ARE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP. IN THE EVENT OF ANY DEFECTS IN MATERIAL OR WORKMANSHIP, W. C. WOLFF COMPANY S SOLE LIABILITY THEREFOR SHALL BE THE REPLACEMENT OF ANY SUCH PRODUCT(S) THAT ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. THE REPLACEMENT OF ANY SUCH PRODUCT(S) SHALL BE W. C. WOLFF COMPANY S SOLE RESPONSIBILITY. THIS WARRANTY SPECIFICALLY EXCLUDES ANY AND ALL CONSEQUENTIAL OR ACCIDENTAL DAMAGES. NO OTHER WARRANTIES OR LIABILITY WHATSOEVER, ARE EITHER EXPRESSED OR IMPLIED. IF ANY SUCH WARRANTIES SHALL BE IMPOSED BY LAW NOTWITHSTANDING THIS PROVISION, THEN SUCH WARRANTIES SHALL BE THE RESPONSIBILITY OF W. C. WOLFF COMPANY S IMMEDIATE BUYER. BY WAY OF EXAMPLE, AND NOT LIMITATION, THERE SHALL BE NO WARRANTIES OF MERCHANTABILITY, USE IN TRADE, OR FITNESS FOR A PARTICULAR PURPOSE. W.C. WOLFF COMPANY SHALL HAVE NO LIABILIT FOR LOSS OF USE, REVENUE OR PROFIT.